The EMS device allows you to control your solar park, inverter, battery, etc. as a virtual production plant optimized for the market. The best place to install the device is near the internet router, connected to the power grid and to the same local area network (LAN) where the inverter is connected. The settings take place automatically.
What does the kit include?
A EMS device (Dusun)
B Network cable (yellow)
C Power adapter and power cord (white)
How to connect the device?
1. Powering up your device
Ensure the device is connected and powered up, connect the power adapter and plug it into the power grid. If device lights up it has powered up.
2. Linking Your EMS Device to the Home Network
Connect one end of the network cable to the LAN port of the internet router and the other to the device.
NB! Make sure that your phone or laptop is connected to the same router, or WIFI extender, or Mesh node as the EMS device (your phone or laptop and the EMS device are in the same home subnet as EMS device).
Log into an EMS portal to get access to the virtual power plant info.
Meaning of device lights
| Light | Meaning | Solution | |
|---|---|---|---|
| Breathing (1 min) | The device is in working order | EMS service is working as expected | |
| Breathing | Connected to service, not inverter | Check the operation and settings of the inverter | |
| Breathing | Connected to inverter, not service | Check your internet connection | |
| Blinking | No service or inverter connection | Check if the device is in the same network as internet & inverter | |
| Blinking | No network connection | Check the network cable connection | |
| Constant | The device starts working | If it doesn't change, please contact us |